Customer Care
Contact Us
1-866-592-0134
Welcome to Beachcomber Hot Tubs!

Reflex Foot Massage/RFM Front Load Jet, Chrome Britewerx 2007 - 2013

$42.40
Item: 3002334

In Stock.

SHIPS FROM OUR VANCOUVER LOCATION


  • Non Posilock system (snap-in) 

  • Reflex foot massage jet/RFM jet - 5.25" across jet face

  • For Beachcomber Hot Tub Models with non posilock fitting type from 2007 to 2013 with Reflex Foot Massage option (RFM option)

  • Massage effect : Beachcomber’s reflex foot massage jet offers a vigorous foot massage through a single, articulating port. RFM hot tub jets receive full pump strength through the three to four jet offered in the RFM option.

  • Colour : Chrome Britewerx

  • This hot tub jet is a reflex foot massage jet (RFM jet)
  • Beachcomber’s reflex foot massage jet offers a vigorous foot massage through a single, articulating port. RFM hot tub jets receive full pump strength through the three to four jet offered in the RFM option.
  • Non posilock (snap in) - 5-1/4" across jet face
  • For Beachcomber Hot Tub Models from 2007 to 2013 with RFM option
  • Colour : Chrome Britewerx

Customer Reviews

Exactly the part that was needed. Review by John
How do rate this product?
How would you rate your Beachcomber hot tub ownership experience
Part was an exact replacement for the original. However, this does not come with _any_ installation instructions. Here's a short description of how I was able to install the in my tub, _while it still had water in it_. First, if the old jet hasn't already fallen off because the tabs are all broken the WHY are you replacing it? Thirdly, the white piece that inserts into the tub is probably jammed in there really good. Go to Amazon an search for "oil seal remover". For $10 it'll save you a lot of hassle. I do not recommend using a screwdriver to pry the things out. If you damage or crack the plastic of the outer white plastic piece that is glued to the tub and piping your are looking at an expensive repair. The white plastic piece of the jet is held in place by a red plastic ring with two screws. Undo the screws, lever out the ring, lever out the white plastic piece. Lot's of crap will probably come out too. Might be time to drain your hot tub now anyway. The new part comes assembled, with the front face and the white plastic rear piece. Do not try to disassemble it, it is not necessary. Push one of the 3 little plastic rings that matches the one in the piece you removed into the new jet. Then insert the red ring back and replace the screws. Note that there is slot in the ring that lines up with a tab on the new jet. You've got to line those up. Then just push the jet firmly into place. If it's not properly seated it'll just come straight off when you start the pump. Push it in again with more pressure. That it. Should be good for another decade of use. (Posted on 12/29/2019)
Needs Instruction sheet Review by Wolfie
How do rate this product?
How would you rate your Beachcomber hot tub ownership experience
Product worked well, once properly installed. However, I had to call the company. There was no installation sheet available. However, once walked thru, it worked great. (Posted on 3/6/2017)
Great product, would recommand Review by Serge
How do rate this product?
How would you rate your Beachcomber hot tub ownership experience
Great product, good pricing, Thank you. (Posted on 12/29/2015)

Write Your Own Review

You're reviewing: Reflex Foot Massage/RFM Front Load Jet, Chrome Britewerx 2007 - 2013

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
How do rate this product?
How would you rate your Beachcomber hot tub ownership experience